menu close icon

Build to print battery pack manufacturing from your released design

For OEMs that already have a design, a data pack and a volume requirement

Build to print means you supply the design and we build it. We work to your drawings, bill of materials and test specification, at our factory in Peterlee, County Durham, and we supply under a long-term agreement to volume production. If you already have a released battery pack design and need it built repeatably and in volume, this page explains what we need from you and how the work runs. We welcome enquiries from OEMs.

What a build to print data pack contains

Before we can quote, we need to see what you want us to build. A complete data pack usually has four parts. Send what you have, because an incomplete pack is a normal starting point and we will tell you what is missing.

Drawings and bill of materials. These should name the approved cells and parts, so that we build exactly what you have specified.

Electrical and test specification. This sets out the performance the pack must meet, how it is tested, and any certificates the pack already holds.

Forecast volumes, timing and target price. We need to know roughly how many packs you expect to need each year and when you want to start, and your target price per pack if you have one.

Confirmation of design ownership. We need to know that you own the design or are licensed to have it built, because we cannot build a pack without that right.

We reply within one working day, and we send our NDA before you share anything sensitive.

How a build to print programme runs

A programme has four steps. First samples and regulatory samples are milestones inside the supply agreement, not separate jobs.

1. Data review. Before we quote, we read your data pack and send you a written list of questions and risks. You see what we have found before anything is priced.

2. Pre-project. Once we have your purchase order, we assign your project team, plan resources, and prepare the tooling, test and traceability for your pack.

3. Kick-off and milestones. We meet your team, agree the plan, and build first articles for your approval. The pack is tested against your specification before release.

4. Supply. We move into repeat production in volume, with a regular joint review of progress, risks and problems.

Your design stays yours

You own the design, and we build to it exactly. We do not change it without your written approval. If our review finds a problem, such as a cell that is hard to source, a weld that will be difficult to repeat, or a test method that cannot be run on every pack, we tell you early, explain the risk and recommend an alternative. You decide what changes.

If your design still needs finishing, our engineers can support it inside the same supply agreement. Our core business is manufacturing, so design support is part of the agreement and not a separate service.

Cells and parts

Where your bill of materials names the cell and the parts, we build to it. We run two supply chains for cells and parts, one that includes China and one that does not, and you choose. The choice affects cost and lead time, so we start from your requirements and recommend the better fit.

A battery pack test fixture at ABT in Peterlee

How we check every pack

Every pack is tested at the end of the line before release, and its results are recorded against its serial number. For more on our quality and traceability, see Battery Pack Manufacturing and Assembly.

Test fixtures at our Peterlee factory, with a small cell assembly in place on one of them.

An example of build to print at ABT

We build packs in volume for powered air-purifying respirators (PAPR) for one of the world’s largest respiratory-protection OEMs. Two further build-to-print programmes are described in our case studies: Industrialising an ocean bottom node battery pack and Scaling UAV battery pack manufacturing for a growing product portfolio.

Looking for more information?

Build to print

  • What is the difference between build to print and a custom battery pack design? x button

  • What should the data pack include? x button

  • Can you build my pack if the drawings are not complete? x button

  • Will you change my design? x button

  • What does the data review give me? x button

  • When do first samples and regulatory samples happen? x button

  • Do you make single prototypes? x button

  • Where do the cells and parts come from? x button

  • Do you guarantee cycle life? x button

  • Who owns the design and the tooling? x button

Send us your data pack

Tell us in the message box what the pack is for, your rough annual volume and when you need to start. We will send our NDA before you share anything sensitive, so please do not send sensitive drawings until you have our NDA.

What happens next. We read your enquiry and reply within one working day. You get a written list of questions and risks before anything is quoted.

By submitting this form you agree to our privacy policy

Do you have a project that needs a custom battery pack?